Skip to the chart
drillbitsizechart

Wrench Size Chart

SAE and metric wrenches side by side with the exact difference, the bolt each one fits, and the pairs that really interchange.

Try

1/2 in hex bolt (ASME B18.2.1)

3/4wrench, in19.05mm across flats19nearest metric

Metric stand-in
19 mm is −0.05 mm too small
Nut
a standard hex nut on a 1/2 bolt usually takes the same wrench; heavy hex nuts go one size up

SAE wrench sizes

WrenchDecimalmmNearest metricHex bolt
1/40.25006.356 mm −0.35—
5/160.31257.948 mm +0.06—
11/320.34388.739 mm +0.27—
3/80.37509.5210 mm +0.48—
7/160.437511.1111 mm −0.111/4 bolt
1/20.500012.713 mm +0.305/16 bolt
9/160.562514.2914 mm −0.293/8 bolt
5/80.625015.8816 mm +0.137/16 bolt
11/160.687517.4617 mm −0.46—
3/40.750019.0519 mm −0.051/2 bolt
13/160.812520.6421 mm +0.369/16 bolt
7/80.875022.2222 mm −0.22—
15/160.937523.8124 mm +0.195/8 bolt
11.000025.425 mm −0.40—
1-1/161.062526.9927 mm +0.01—
1-1/81.125028.5728 mm −0.573/4 bolt
1-1/41.250031.7532 mm +0.25—
1-5/161.312533.3434 mm +0.667/8 bolt
1-3/81.375034.9234 mm −0.92—
1-7/161.437536.5136 mm −0.51—
1-1/21.500038.138 mm −0.101 bolt

Metric wrench sizes

mmInchNearest SAEHex bolt
50.19691/4 in +1.35—
5.50.21651/4 in +0.85M3
60.23621/4 in +0.35—
70.27561/4 in −0.65M4
80.31505/16 in −0.06M5
90.354311/32 in −0.27—
100.39373/8 in −0.48M6
110.43317/16 in +0.11—
120.47241/2 in +0.70—
130.51181/2 in −0.30M8
140.55129/16 in +0.29—
150.59069/16 in −0.71—
160.62995/8 in −0.12M10
170.669311/16 in +0.46M10 (DIN)
180.708711/16 in −0.54M12
190.74803/4 in +0.05M12 (DIN)
200.787413/16 in +0.64—
210.826813/16 in −0.36M14
220.86617/8 in +0.22M14 (DIN)
230.90557/8 in −0.78—
240.944915/16 in −0.19M16
250.98431 in +0.40—
261.02361 in −0.60—
271.06301-1/16 in −0.01—
281.10241-1/8 in +0.57—
301.18111-1/8 in −1.43M20
321.25981-1/4 in −0.25M22 (DIN)
341.33861-5/16 in −0.66M22
361.41731-7/16 in +0.51M24
381.49611-1/2 in +0.10—

SAE wrench sizes with metric equivalents

The size is the distance across the flats of the nut or bolt head. The metric column shows the nearest metric wrench and how much bigger (+) or smaller (−) it is. A wrench up to about 0.15 mm oversize will usually turn a fastener; more than that and it rounds the corners.

SAEInchesmmNearest metricFits
1/40.25006.356 mm (−0.35 mm)—
5/160.31257.948 mm (+0.06 mm)—
11/320.34388.739 mm (+0.27 mm)—
3/80.37509.5210 mm (+0.48 mm)—
7/160.437511.1111 mm (−0.11 mm)1/4 bolt
1/20.500012.7013 mm (+0.30 mm)5/16 bolt
9/160.562514.2914 mm (−0.29 mm)3/8 bolt
5/80.625015.8816 mm (+0.13 mm)7/16 bolt
11/160.687517.4617 mm (−0.46 mm)—
3/40.750019.0519 mm (−0.05 mm)1/2 bolt
13/160.812520.6421 mm (+0.36 mm)9/16 bolt
7/80.875022.2322 mm (−0.22 mm)—
15/160.937523.8124 mm (+0.19 mm)5/8 bolt
11.000025.4025 mm (−0.40 mm)—
1-1/161.062526.9927 mm (+0.01 mm)—
1-1/81.125028.5828 mm (−0.57 mm)3/4 bolt
1-1/41.250031.7532 mm (+0.25 mm)—
1-5/161.312533.3434 mm (+0.66 mm)7/8 bolt
1-3/81.375034.9234 mm (−0.92 mm)—
1-7/161.437536.5136 mm (−0.51 mm)—
1-1/21.500038.1038 mm (−0.10 mm)1 bolt

Metric wrench sizes with SAE equivalents

MetricInchesNearest SAEFits
5 mm0.19691/4 in (+1.35 mm)—
5.5 mm0.21651/4 in (+0.85 mm)M3
6 mm0.23621/4 in (+0.35 mm)—
7 mm0.27561/4 in (−0.65 mm)M4
8 mm0.31505/16 in (−0.06 mm)M5
9 mm0.354311/32 in (−0.27 mm)—
10 mm0.39373/8 in (−0.48 mm)M6
11 mm0.43317/16 in (+0.11 mm)—
12 mm0.47241/2 in (+0.70 mm)—
13 mm0.51181/2 in (−0.30 mm)M8
14 mm0.55129/16 in (+0.29 mm)—
15 mm0.59069/16 in (−0.71 mm)—
16 mm0.62995/8 in (−0.13 mm)M10
17 mm0.669311/16 in (+0.46 mm)M10 (DIN)
18 mm0.708711/16 in (−0.54 mm)M12
19 mm0.74803/4 in (+0.05 mm)M12 (DIN)
20 mm0.787413/16 in (+0.64 mm)—
21 mm0.826813/16 in (−0.36 mm)M14
22 mm0.86617/8 in (+0.22 mm)M14 (DIN)
23 mm0.90557/8 in (−0.78 mm)—
24 mm0.944915/16 in (−0.19 mm)M16
25 mm0.98431 in (+0.40 mm)—
26 mm1.02361 in (−0.60 mm)—
27 mm1.06301-1/16 in (−0.01 mm)—
28 mm1.10241-1/8 in (+0.57 mm)—
30 mm1.18111-1/8 in (−1.43 mm)M20
32 mm1.25981-1/4 in (−0.25 mm)M22 (DIN)
34 mm1.33861-5/16 in (−0.66 mm)M22
36 mm1.41731-7/16 in (+0.51 mm)M24
38 mm1.49611-1/2 in (+0.10 mm)—
ISO or DIN? Four metric sizes changed when ISO replaced the DIN standards: M10 went from 17 to 16 mm, M12 from 19 to 18, M14 from 22 to 21 and M22 from 32 to 34. Hardware stores sell both, so carry both if you work on mixed equipment.

Which ones swap

1/4 in → 6 mm−0.35 mm5/16 in → 8 mm+0.06 mm3/8 in → 10 mm+0.48 mm7/16 in → 11 mm−0.11 mm1/2 in → 13 mm+0.30 mm9/16 in → 14 mm−0.29 mm5/8 in → 16 mm+0.13 mm11/16 in → 17 mm−0.46 mm3/4 in → 19 mm−0.05 mm13/16 in → 21 mm+0.36 mm7/8 in → 22 mm−0.22 mm15/16 in → 24 mm+0.19 mm1 in → 25 mm−0.40 mm
Green pairs are within 0.15 mm and usually interchange. Orange pairs are too loose or too tight.

The pairs that work in practice: 5/16 in and 8 mm, 7/16 in and 11 mm, 5/8 in and 16 mm, 3/4 in and 19 mm. The common trap is 1/2 in against 13 mm: 13 mm is 0.30 mm loose and will strip a tight nut. 9/16 in against 14 mm is the opposite: 14 mm is too small to go on.

Hex keys (Allen wrenches)

Socket head screwHex key
#00.050 in
#11/16 in
#25/64 in
#35/64 in
#43/32 in
#53/32 in
#67/64 in
#89/64 in
#105/32 in
1/43/16 in
5/161/4 in
3/85/16 in
7/163/8 in
1/23/8 in
5/81/2 in
3/45/8 in
M21.5 mm
M2.52 mm
M32.5 mm
M43 mm
M54 mm
M65 mm
M86 mm
M108 mm
M1210 mm
M1412 mm
M1614 mm
M2017 mm
M2419 mm
10 mmM613 mmM816 mmM10 (DIN 17)
Metric hex heads to scale. The dashed circle is the bolt diameter.

Sources: Wikipedia, "Wrench" (bolt sizes and wrench openings, ISO and DIN); Wikipedia, "ISO metric screw thread" (ISO 261 coarse and fine pitches, basic profile).

Wrench size chart questions

What metric wrench is the same as 3/4 inch?
19 mm. 3/4 in is 19.05 mm, so they interchange.
Is 13 mm the same as 1/2 inch?
No. 1/2 in is 12.70 mm, so a 13 mm wrench is 0.30 mm loose and can round a tight nut.
What size wrench for an M10 bolt?
16 mm for ISO 4014/4017 bolts, 17 mm for the older DIN 931/933. Both are still sold.
What SAE wrench is closest to 10 mm?
None fits well: 3/8 in is 9.53 mm, too small to go on. Use a 10 mm wrench.
What size wrench for a 5/16 bolt?
1/2 in for a standard hex head and nut. A 13 mm wrench is 0.30 mm loose on it.