Metric screw sizes M1 to M30
One row per metric size: the coarse pitch (the one you get when a drawing just says M8), any fine pitches, the basic minor diameter, the coarse tap drill, the medium clearance hole, the hex wrench size and the socket head hex key. All dimensions in millimetres.
| Size | Coarse pitch | Fine pitches | Minor dia | Tap drill | Clearance | Hex wrench | Hex key |
|---|---|---|---|---|---|---|---|
| M1 | 0.25 | — | 0.73 | 0.75 | — | — | — |
| M1.2 | 0.25 | — | 0.93 | 0.95 | — | — | — |
| M1.4 | 0.3 | — | 1.08 | 1.10 | — | — | — |
| M1.6 | 0.35 | — | 1.22 | 1.25 | 1.8 | — | — |
| M2 | 0.4 | — | 1.57 | 1.60 | 2.4 | — | 1.5 |
| M2.5 | 0.45 | — | 2.01 | 2.05 | 2.9 | — | 2 |
| M3 | 0.5 | — | 2.46 | 2.50 | 3.4 | 5.5 | 2.5 |
| M3.5 | 0.6 | — | 2.85 | 2.90 | — | — | — |
| M4 | 0.7 | — | 3.24 | 3.30 | 4.5 | 7 | 3 |
| M5 | 0.8 | — | 4.13 | 4.20 | 5.5 | 8 | 4 |
| M6 | 1 | — | 4.92 | 5.00 | 6.6 | 10 | 5 |
| M8 | 1.25 | 1 | 6.65 | 6.80 | 9 | 13 | 6 |
| M10 | 1.5 | 1.25, 1 | 8.38 | 8.50 | 11 | 16 / 17 | 8 |
| M12 | 1.75 | 1.5, 1.25 | 10.11 | 10.20 | 13.5 | 18 / 19 | 10 |
| M14 | 2 | 1.5 | 11.83 | 12.00 | 15.5 | 21 / 22 | 12 |
| M16 | 2 | 1.5 | 13.83 | 14.00 | 17.5 | 24 | 14 |
| M18 | 2.5 | 1.5 | 15.29 | 15.50 | — | — | — |
| M20 | 2.5 | 1.5 | 17.29 | 17.50 | 22 | 30 | 17 |
| M22 | 2.5 | 1.5 | 19.29 | 19.50 | — | 34 / 32 | — |
| M24 | 3 | 2 | 20.75 | 21.00 | 26 | 36 | 19 |
| M27 | 3 | — | 23.75 | 24.00 | — | — | — |
| M30 | 3.5 | — | 26.21 | 26.50 | 33 | 46 | — |
Two hex sizes? Where the wrench column shows two numbers, the first is ISO 4032 / ISO 4014 and the second is the older DIN 934 / DIN 931 that many hardware stores still stock. M10 is 16 mm ISO, 17 mm DIN; M12 is 18 ISO, 19 DIN.
Reading a metric thread callout
| Callout | Means |
|---|---|
| M8 | M8 × 1.25 coarse, 6g/6H tolerance |
| M8 × 1 | 8 mm diameter, 1 mm fine pitch |
| M8 × 1.25 − 6g | External thread, standard tolerance |
| M8 × 1.25 − 6H | Internal thread (tapped hole), standard tolerance |
| M8 × 20 | Often a bolt: 8 mm thread, 20 mm long (pitch omitted means coarse) |
| M8 × 1.25 LH | Left-hand thread |
Metric and inch near-misses
| Metric | Diameter in | Pitch TPI | Close inch thread | Interchangeable? |
|---|---|---|---|---|
| M5 × 0.8 | 0.197 | 31.75 | #10-32 (0.190, 32 TPI) | No: binds after a turn |
| M6 × 1 | 0.236 | 25.4 | 1/4-28 (0.250, 28 TPI) | No |
| M8 × 1.25 | 0.315 | 20.3 | 5/16-18 (0.3125, 18 TPI) | No |
| M10 × 1.5 | 0.394 | 16.9 | 3/8-16 (0.375, 16 TPI) | No |
| M12 × 1.75 | 0.472 | 14.5 | 1/2-13 (0.500, 13 TPI) | No |
Sources: Wikipedia, "ISO metric screw thread" (ISO 261 coarse and fine pitches, basic profile); Wikipedia, "List of drill and tap sizes" (inch and metric tap drills, clearance holes); Wikipedia, "Wrench" (bolt sizes and wrench openings, ISO and DIN).