Metric drill size steps
Metric bits are named by their diameter, so there is nothing to memorise: a 6.8 mm bit is 6.8 mm. Sizes come in 0.05 mm steps below 3 mm, 0.1 mm steps from 3 to 14 mm, and 0.25 or 0.5 mm steps above that. This chart lists 223 sizes from 0.3 to 32 mm. Whole and half millimetres are the sizes in a standard set; the 0.1 mm sizes in between are sold singly or in machinist sets.
Common metric bits in inches
| Metric | Inch | Nearest fractional | Nearest number / letter | Tap drill for |
|---|---|---|---|---|
| 1.0 mm | 0.0394 | 3/64 +0.0075 | #61 −0.0004 | — |
| 1.5 mm | 0.0591 | 1/16 +0.0034 | #53 +0.0004 | — |
| 2.0 mm | 0.0787 | 5/64 −0.0006 | #47 −0.0002 | — |
| 2.5 mm | 0.0984 | 3/32 −0.0047 | #40 −0.0004 | tap M3x0.5 |
| 3.0 mm | 0.1181 | 1/8 +0.0069 | #31 +0.0019 | — |
| 3.3 mm | 0.1299 | 1/8 −0.0049 | #30 −0.0014 | tap M4x0.7 |
| 3.5 mm | 0.1378 | 9/64 +0.0028 | #29 −0.0018 | — |
| 4.0 mm | 0.1575 | 5/32 −0.0012 | #22 −0.0005 | — |
| 4.2 mm | 0.1654 | 11/64 +0.0065 | #19 +0.0006 | tap M5x0.8 |
| 4.5 mm | 0.1772 | 11/64 −0.0053 | #16 −0.0002 | — |
| 5.0 mm | 0.1969 | 13/64 +0.0063 | #9 −0.0009 | tap M6x1 |
| 5.5 mm | 0.2165 | 7/32 +0.0022 | #3 −0.0035 | — |
| 6.0 mm | 0.2362 | 15/64 −0.0018 | B +0.0018 | — |
| 6.5 mm | 0.2559 | 1/4 −0.0059 | F +0.0011 | — |
| 6.8 mm | 0.2677 | 17/64 −0.0021 | H −0.0017 | tap M8x1.25 |
| 7.0 mm | 0.2756 | 9/32 +0.0057 | J +0.0014 | tap M8x1 |
| 8.0 mm | 0.3150 | 5/16 −0.0025 | O +0.0010 | — |
| 8.5 mm | 0.3346 | 21/64 −0.0065 | Q −0.0026 | tap M10x1.5 |
| 9.0 mm | 0.3543 | 23/64 +0.0050 | T +0.0037 | tap M10x1 |
| 10.0 mm | 0.3937 | 25/64 −0.0031 | X +0.0033 | — |
| 10.2 mm | 0.4016 | 13/32 +0.0047 | Y +0.0024 | tap M12x1.75 |
| 11.0 mm | 0.4331 | 7/16 +0.0044 | — | — |
| 12.0 mm | 0.4724 | 15/32 −0.0037 | — | tap M14x2 |
| 13.0 mm | 0.5118 | 33/64 +0.0038 | — | — |
Tap drill sizes are the reason for the odd ones
Sizes like 3.3, 4.2, 6.8, 8.5 and 10.2 mm look random until you notice they are the ISO tap drills for M4, M5, M8, M10 and M12. The rule for a coarse metric thread is simply diameter minus pitch: M8 x 1.25 needs 8 − 1.25 = 6.75, rounded to 6.8 mm. The metric tap drill chart has every coarse and fine size.
- Take the thread diameter in mm (M10 → 10).
- Subtract the pitch (coarse M10 is 1.5 mm).
- Drill the result: 10 − 1.5 = 8.5 mm.
Using metric bits on inch work
A full metric set in 0.1 mm steps lands within 0.002 in of almost every number and letter drill, so many shops keep one metric set instead of three inch sets. Search an inch size in the box above and the finder shows the nearest metric bit and how far off it is. For a tap drill, pick the metric bit just over the inch size, never under.
Sources: Wikipedia, "Drill bit sizes" (number and letter gauge tables, after ASME B94.11M); Wikipedia, "ISO metric screw thread" (ISO 261 coarse and fine pitches, basic profile).