Skip to the chart
drillbitsizechart

Clearance Hole Chart

The drill a screw or bolt passes through: close fit for parts drilled together, free fit for parts drilled apart. Inch and ISO 273 metric.

Try

#10 screw · 0.1900 in body

#9close fit#7free fit0.0110free gap, in

Close fit
#9 0.1960 · 4.98 mm · 0.0060 in over the screw
Free fit
#7 0.2010 · 5.11 mm · 0.0110 in over
Metric drill instead
5.2 mm for free fit

Clearance holes for inch screwsclose = snug, free = room to line up

ScrewBody inClose fitmmFree fitmm
#00.0600#52 0.06351.61#50 0.07001.78
#10.0730#48 0.07601.93#46 0.08102.06
#20.0860#43 0.08902.26#41 0.09602.44
#30.0990#37 0.10402.64#35 0.11002.79
#40.1120#32 0.11602.95#30 0.12853.26
#50.1250#30 0.12853.26#29 0.13603.45
#60.1380#27 0.14403.66#25 0.14953.8
#80.1640#18 0.16954.31#16 0.17704.5
#100.1900#9 0.19604.98#7 0.20105.11
#120.2160#2 0.22105.61#1 0.22805.79
1/40.2500F 0.25706.53H 0.26606.76
5/160.3125P 0.32308.2Q 0.33208.43
3/80.3750W 0.38609.8X 0.397010.08
7/160.437529/64 0.453111.5115/32 0.468811.91
1/20.500033/64 0.515613.117/32 0.531313.49
5/80.625041/64 0.640616.2721/32 0.656316.67
3/40.750049/64 0.765619.4525/32 0.781319.84
7/80.875057/64 0.890622.6229/32 0.906323.02
11.00001-1/64 1.015625.81-1/32 1.031326.19

Clearance holes for metric screws, ISO 273

ScrewFine mmMedium mmCoarse mmMedium in
M1.61.71.820.0709
M22.22.42.60.0945
M2.52.72.93.10.1142
M33.23.43.60.1339
M44.34.54.80.1772
M55.35.55.80.2165
M66.46.670.2598
M88.49100.3543
M1010.511120.4331
M121313.514.50.5315
M141515.516.50.6102
M161717.518.50.6890
M202122240.8661
M242526281.0236
M303133351.2992

Inch screw clearance holes

Close fit is snug: the screw passes with little side play, for parts that need to line up. Free fit leaves room for small errors in hole position and for two or more parts with holes drilled separately.

ScrewBody inClose fitinmmFree fitinmm
#00.0600#520.06351.61#500.07001.78
#10.0730#480.07601.93#460.08102.06
#20.0860#430.08902.26#410.09602.44
#30.0990#370.10402.64#350.11002.79
#40.1120#320.11602.95#300.12853.26
#50.1250#300.12853.26#290.13603.45
#60.1380#270.14403.66#250.14953.80
#80.1640#180.16954.31#160.17704.50
#100.1900#90.19604.98#70.20105.11
#120.2160#20.22105.61#10.22805.79
1/40.2500F0.25706.53H0.26606.76
5/160.3125P0.32308.20Q0.33208.43
3/80.3750W0.38609.80X0.397010.08
7/160.437529/640.453111.5115/320.468811.91
1/20.500033/640.515613.1017/320.531313.49
5/80.625041/640.640616.2721/320.656316.67
3/40.750049/640.765619.4525/320.781319.84
7/80.875057/640.890622.6229/320.906323.02
11.00001-1/641.015625.801-1/321.031326.19

Metric clearance holes (ISO 273)

Metric clearance holes come in three classes: fine, medium and coarse. Medium is the default when a drawing just says "clearance".

ScrewFine mmMedium mmCoarse mmMedium in
M1.61.701.802.000.0709
M22.202.402.600.0945
M2.52.702.903.100.1142
M33.203.403.600.1339
M44.304.504.800.1772
M55.305.505.800.2165
M66.406.607.000.2598
M88.409.0010.000.3543
M1010.5011.0012.000.4331
M1213.0013.5014.500.5315
M1415.0015.5016.500.6102
M1617.0017.5018.500.6890
M2021.0022.0024.000.8661
M2425.0026.0028.001.0236
M3031.0033.0035.001.2992
#10screw 0.190#9close 0.1960#7free 0.20107/32loose 0.2188
A #10 screw needs only 0.006 in extra for a close fit; free fit adds 0.011 in. 7/32 is a common "it will go" size for sloppy work.

Which fit to use

SituationFitWhy
Holes drilled together through both partsCloseHoles already line up
Two parts drilled separately, located by dowelsCloseDowels handle alignment
Parts drilled separately, 3 or more boltsFreeAllows for spacing error
Sheet metal, enclosures, electronicsFree or mediumPaint and burrs reduce the hole
Counterbored socket head screwsFreeScrew must not bind in the counterbore
Wood and plasticsFreeMaterial swells and moves
Countersunk screws: the head angle is 82° for inch flat heads and 90° for metric. Using a 90° countersink on an 82° inch screw leaves the head proud at the edge and loose in the middle.

Sources: Wikipedia, "List of drill and tap sizes" (inch and metric tap drills, clearance holes); Wikipedia, "ISO metric screw thread" (ISO 261 coarse and fine pitches, basic profile).

Clearance hole chart questions

What size clearance hole for a #10 screw?
#9 (0.196 in) for a close fit, #7 (0.201 in) for a free fit.
What drill for a 1/4 inch bolt to pass through?
F (0.257 in) for a close fit or H (0.266 in) for a free fit. 17/64 (0.2656 in) is a fractional free-fit choice.
What size clearance hole for M6?
6.4 mm fine, 6.6 mm medium (the usual default), 7.0 mm coarse.
What clearance hole for an M4 screw?
4.5 mm medium. 4.3 mm for fine and 4.8 mm for coarse.
What size hole for a #8 screw?
#18 (0.1695 in) close fit, #16 (0.177 in) free fit.