Skip to the chart
drillbitsizechart

Steel Gauge Chart

Manufacturers’ Standard Gauge for steel sheet: thickness, weight per area and per full sheet, and the galvanized equivalent.

Try

16 gauge standard steel

0.0598inch1.52mm1/16≈ fraction

Same gauge, other metals
Galvanized steel 0.0635 · Stainless steel 0.0625 · Aluminum 0.0508
Weight
2.5 lb per sq ft
Drill for a pop rivet hole
see the rivet maker; the sheet only sets grip length

Steel gauge chartManufacturers’ Standard Gauge

GaugeInchmmlb / ft²Galvanized in · mm
30.23916.0710—
40.22425.699.375—
50.20925.318.75—
60.19434.948.125—
70.17934.557.5—
80.16444.186.8750.1681 4.27
90.14953.86.250.1532 3.89
100.13453.425.6250.1382 3.51
110.11963.0450.1233 3.13
120.10462.664.3750.1084 2.75
130.08972.283.750.0934 2.37
140.07471.93.1250.0785 1.99
150.06731.712.8130.0710 1.8
160.05981.522.50.0635 1.61
170.05381.372.250.0575 1.46
180.04781.2120.0516 1.31
190.04181.061.750.0456 1.16
200.03590.911.50.0396 1.01
210.03290.841.3750.0366 0.93
220.02990.761.250.0336 0.85
230.02690.681.1250.0306 0.78
240.02390.6110.0276 0.7
250.02090.530.8750.0247 0.63
260.01790.450.750.0217 0.55
270.01640.420.6880.0202 0.51
280.01490.380.6250.0187 0.47
290.01350.340.5630.0172 0.44
300.01200.30.50.0157 0.4
310.01050.270.4380.0142 0.36
320.00970.250.4060.0135 0.34
330.00900.230.375—
340.00820.210.344—
350.00750.190.313—
360.00670.170.281—
370.00640.160.266—
380.00600.150.25—

Gauge, thickness and weight

US steel sheet gauge (Manufacturers’ Standard Gauge) is defined by weight, not thickness. The thickness is the weight per square foot divided by 41.82, the weight of a one-inch-thick square foot of steel. That is why the thickness steps look irregular while the weights are round numbers: 16 gauge weighs exactly 2.5 lb per square foot.

GaugeInchmmlb / ft²kg / m²lb per 4 × 8 sheet
30.23916.0710.00048.8320
40.22425.699.37545.8300
50.20925.318.75042.7280
60.19434.948.12539.7260
70.17934.557.50036.6240
80.16444.186.87533.6220
90.14953.806.25030.5200
100.13453.425.62527.5180
110.11963.045.00024.4160
120.10462.664.37521.4140
130.08972.283.75018.3120
140.07471.903.12515.3100
150.06731.712.81313.790
160.05981.522.50012.280
170.05381.372.25011.072
180.04781.212.0009.864
190.04181.061.7508.556
200.03590.911.5007.348
210.03290.841.3756.744
220.02990.761.2506.140
230.02690.681.1255.536
240.02390.611.0004.932
250.02090.530.8754.328
260.01790.450.7503.724
270.01640.420.6883.422
280.01490.380.6253.120
290.01350.340.5632.718
300.01200.300.5002.416
00.050.10.150.20.2531016202430gaugethickness (in)steel
Thickness falls fast at low gauges and flattens out: 3 to 10 gauge loses 0.10 in, 20 to 30 gauge only 0.024 in.

Plate or sheet?

Steel thicker than about 3/16 in (7 gauge, 0.1793 in) is usually called plate and sold by fraction (1/4, 3/8, 1/2 in), not gauge. Below 7 gauge it is sheet. Structural tube and pipe use gauge for the wall: 11 gauge tube has a 0.1196 in wall, 14 gauge 0.0747 in.

Weighing a sheet

  1. Find the gauge in the table and read lb/ft².
  2. Multiply by the area in square feet: a 2 × 4 ft sheet of 14 gauge is 8 ft² × 3.125 = 25.0 lb.
  3. For metric, use kg/m² × area in m².
  4. Galvanized sheet weighs about 0.156 lb/ft² more for the zinc.
Measured thickness slightly off? Mill tolerance on 16 gauge cold-rolled is roughly ±0.004 in, so a reading of 0.057 or 0.063 in is still 16 gauge. Type the reading into the search box to see the nearest gauges either side.

Sources: Wikipedia, "Sheet metal" (gauge tables and the weight-per-area basis of the steel gauge).

Steel gauge chart questions

How thick is 11 gauge steel?
0.1196 in (3.04 mm), about 1/8 in.
How thick is 10 gauge steel?
0.1345 in (3.42 mm).
What gauge is 1/8 inch steel?
11 gauge (0.1196 in) is the closest; 1/8 in is 0.125.
How much does 16 gauge steel weigh?
2.5 lb per square foot, so a 4 × 8 ft sheet weighs 80 lb.
Is 12 gauge thicker than 14 gauge?
Yes. 12 gauge is 0.1046 in, 14 gauge is 0.0747 in.