Inch bolts: wrench, key, thread and holes
One row per bolt diameter: the wrench that fits a standard hex head, the hex key for a socket head cap screw of the same size, the coarse and fine thread (TPI · tap drill), and the free-fit clearance drill.
| Bolt | Hex wrench | Hex key (SHCS) | UNC · tap drill | UNF · tap drill | Clearance (free) |
|---|---|---|---|---|---|
| 1/4 | 7/16 | 3/16 | 20 · #7 | 28 · #3 | H |
| 5/16 | 1/2 | 1/4 | 18 · F | 24 · I | Q |
| 3/8 | 9/16 | 5/16 | 16 · 5/16 | 24 · Q | X |
| 7/16 | 5/8 | 3/8 | 14 · U | 20 · 25/64 | 15/32 |
| 1/2 | 3/4 | 3/8 | 13 · 27/64 | 20 · 29/64 | 17/32 |
| 9/16 | 13/16 | — | 12 · 31/64 | 18 · 33/64 | — |
| 5/8 | 15/16 | 1/2 | 11 · 17/32 | 18 · 37/64 | 21/32 |
| 3/4 | 1-1/8 | 5/8 | 10 · 21/32 | 16 · 11/16 | 25/32 |
| 7/8 | 1-5/16 | — | 9 · 49/64 | 14 · 13/16 | 29/32 |
| 1 | 1-1/2 | — | 8 · 7/8 | 12 · 59/64 | 1-1/32 |
Metric bolts
| Bolt | Hex wrench mm (ISO / DIN) | Hex key mm | Pitch · tap drill | Clearance mm (medium) |
|---|---|---|---|---|
| M3 | 5.5 | 2.5 | 0.5 · 2.5 | 3.4 |
| M4 | 7 | 3 | 0.7 · 3.3 | 4.5 |
| M5 | 8 | 4 | 0.8 · 4.2 | 5.5 |
| M6 | 10 | 5 | 1 · 5 | 6.6 |
| M8 | 13 | 6 | 1.25 · 6.8 | 9 |
| M10 | 16 / 17 | 8 | 1.5 · 8.5 | 11 |
| M12 | 18 / 19 | 10 | 1.75 · 10.2 | 13.5 |
| M14 | 21 / 22 | 12 | 2 · 12 | 15.5 |
| M16 | 24 | 14 | 2 · 14 | 17.5 |
| M20 | 30 | 17 | 2.5 · 17.5 | 22 |
| M22 | 34 / 32 | — | 2.5 · 19.5 | — |
| M24 | 36 | 19 | 3 · 21 | 26 |
| M30 | 46 | — | 3.5 · 26.5 | 33 |
Strength grades
| Marking on head | Grade | Typical use |
|---|---|---|
| No marks | SAE grade 2 (low carbon) | Light-duty, household |
| 3 radial lines | SAE grade 5 (medium carbon, hardened) | Automotive, machinery |
| 6 radial lines | SAE grade 8 (alloy, hardened) | Suspension, high-load joints |
| 8.8 | Metric property class 8.8 | Roughly equivalent to grade 5 |
| 10.9 | Metric property class 10.9 | Roughly equivalent to grade 8 |
| 12.9 | Metric property class 12.9 | Socket head cap screws, highest common |
Bolt or screw? In practice: a bolt goes through a clearance hole and takes a nut; a screw threads into a tapped hole. The same hex-head part can be either, which is why this chart gives both the tap drill and the clearance drill.
Measuring a bolt
- Diameter: calipers across the threads. 0.245–0.249 in is a 1/4 in bolt; 5.8–5.95 mm is M6.
- Thread: count threads per inch, or use a pitch gauge; see the thread pitch chart.
- Length: from under the head to the end (overall for countersunk heads).
- Head: measure across the flats, or try wrenches; see the wrench size chart.
Sources: Wikipedia, "Unified Thread Standard" (UNC / UNF series, number-screw diameters); Wikipedia, "ISO metric screw thread" (ISO 261 coarse and fine pitches, basic profile); Wikipedia, "Wrench" (bolt sizes and wrench openings, ISO and DIN).