How to turn a fraction into a decimal
Divide the top number by the bottom number: 17 ÷ 64 = 0.265625. The chart above has every 64th from 1/64 to 1 in, to six places, with the millimetre value and any number, letter or metric drill that is exactly the same size. Type a mixed number such as 1-3/8 and the whole part is added on.
- Divide: 5/16 = 5 ÷ 16 = 0.3125.
- For mixed numbers, add the whole inches: 1-5/16 = 1.3125.
- For millimetres, multiply by 25.4: 0.3125 × 25.4 = 7.9375 mm.
- Reduce first if you like: 6/16 is 3/8, and the chart shows fractions in lowest terms.
Every 64th is a halving
Inch fractions are binary: each step halves the one before, so every 64th has a decimal that ends after at most six places. That is why 1/64 = 0.015625 and nothing longer.
| Fraction | Decimal | Each step is |
|---|---|---|
| 1/2 | 0.5 | the start |
| 1/4 | 0.25 | half of 1/2 |
| 1/8 | 0.125 | half of 1/4 |
| 1/16 | 0.0625 | half of 1/8 |
| 1/32 | 0.03125 | half of 1/16 |
| 1/64 | 0.015625 | half of 1/32 |
The ones worth memorising
Ten fractions cover most of what comes up at the bench. The last column lists drills from the other systems within 0.002 in, with the difference: handy when a drawing gives a fraction but your index has a gap.
| Fraction | Decimal | mm | Near-identical drills |
|---|---|---|---|
| 1/8 | 0.125 | 3.18 | 3.2 mm +0.0010 |
| 3/16 | 0.1875 | 4.76 | #12 +0.0015, 4.8 mm +0.0015 |
| 1/4 | 0.25 | 6.35 | E +0.0000, 6.3 mm −0.0020 |
| 5/16 | 0.3125 | 7.94 | 7.9 mm −0.0015 |
| 3/8 | 0.375 | 9.52 | V +0.0020, 9.5 mm −0.0010 |
| 7/16 | 0.4375 | 11.11 | 11.1 mm −0.0005 |
| 1/2 | 0.5 | 12.70 | 12.7 mm +0.0000 |
| 5/8 | 0.625 | 15.88 | — |
| 3/4 | 0.75 | 19.05 | 19.0 mm −0.0020 |
| 7/8 | 0.875 | 22.23 | 22.25 mm +0.0010 |
Sources: Wikipedia, "Drill bit sizes" (number and letter gauge tables, after ASME B94.11M).